These pumps are suitable for the borewells of 4" and above and openwells where discharge requirement is limited. The pump is suitable for both Vertical and Horizontal installation. |
| |
| APPLICATIONS |
: |
For Domestic Purpose, Small farms, Gardens, Hotels, Small Industries and Drinking Water supply. |
| PUMPED LIQUIDS |
: |
Clean, Thin, Non-aggressive and Non-explosive liquid without solid components or fibers. |
| STANDARD ACCESSORIES |
: |
Pressure gauge, Presure Regulating Valve, Jet Assembly. |
| DETAILS |
: |
Jet Pumps employ a 240 volts, 50 Hz, Capacitor start and run, 2880 RPM, totally enclosed fan cooled prime mover motors of single phase or 415 volts three phase. Motor is tasted as per IS : 996 or IS : 7538. Dynamic balancing of rotor assembly with impeller ensures longer life for bearing and seals. Close grained cast iron casing is used. Front and bearing is protected by a water thrower. Mechanical Seal is fitted over the shaft, which grounded to Close tolerances. High quality Capacitors are used to avoid frequent breakdowns. Both Single and Multi stage version is available. |
| IMPORTANT NOTES : |
: |
| * |
Use Quality pipes with ISI mark. |
| * |
Pipe size should be used as recommended. |
| * |
Reduce number of bends and elbows. |
| * |
Do not wrap the pump with air tight materials such as polythene sheet because condensation will form in tightly wrapped motor and winding will burnout. |
| * |
Over loading will be avoided if the pump is installed according to our recommnded head range with a minimum submergence of 1.5r for Jet Unit. |
| * |
Pump should not be operated dry. Before installing the pump read our operators manual throughly. |
|
|
APPROXIMATE PERFORMANCE DATA AT RATED VOLTAGE (2880) RPM |
